PTZ setup Foscam FI9828V2, PtzStopRun-command not available

viewpoint
Posts: 3
Joined: Mon Feb 22, 2016 3:25 pm

PTZ setup Foscam FI9828V2, PtzStopRun-command not available

Postby viewpoint » Sat Mar 19, 2016 9:46 pm

I need help with PTZ function setup for Foscam FI9828V2.

Camera Model Foscam FI9828P V2
System Firmware Version 1.4.1.10
Application Firmware Version 2.11.1.132
Plug-In Version 3.1.0.9

I have already adapted the PTZ2.XML file that the CGI commands for panning and tilting the camera set in motion.
XML base was Camera id = "187"; "Foscam" Model = "FI9821W".

But the movement does not stop on mouse button up.

I modified this:
<Left>cmd=ptzMoveLeft</Left>
<LeftUp>cmd=ptzMoveTopLeft</LeftUp>
<Right>cmd=ptzMoveRight</Right>
<RightUp>cmd=ptzMoveTopRight</RightUp>
<Up>cmd=ptzMoveUp</Up>
<Down>cmd=ptzMoveDown</Down>
<LeftDown>cmd=ptzMoveBottomLeft</LeftDown>
<RightDown>cmd=ptzMoveBottomRight</RightDown>
<Stop>cmd=PtzStopRun</Stop>
<ZoomIn>cmd=zoomIn</ZoomIn>
<ZoomOut>cmd=zoomOut</ZoomOut>

Choosing "Stop" from dropdown list stops movement.
<ExtendedCommands>
<Command Name="Stop">cmd=ptzStopRun</Command>
But this is not practical.

By using fiddler and firebug, I could find out that the buttons of the camera web interface
do send an on-mouse-button-up-PtzStopRun command.

However, the PTZ controller panel seems not to support mouse button up command to send a PtzStopRun command.

This also happens for optical zoom, zoom once started, it does not stop when you release the mouse button.

Here you need, according fiddler, the zoomStop command.
I do not see where I could enter this in the PTZ2.XML file.

Using the mouseWheel button or the Arrow keys there are no differences.

On the other hand, the PT-stop works in object-tracking very well.

So what can I do, to use the PTZ controller panel with mouse?

Thank you

Best regads
Ulli

Any ideas afer one year? Anyone?
Camera Model Foscam FI9828P V2
System Firmware Version 1.4.1.10
Application Firmware Version 2.11.1.132

luuk_jansen
Posts: 1
Joined: Sun Jan 28, 2018 11:47 am

Re: PTZ setup Foscam FI9828V2, PtzStopRun-command not available

Postby luuk_jansen » Sun Jan 28, 2018 11:48 am

I am having the same problem and am wondering if there is a fix yet.
On ispyconnect web interface the controller works correctly, so it would be great if it also works wirth the embedded PTZ web controller.


Return to “System Setups”

Who is online

Users browsing this forum: No registered users and 1 guest