Motion Detection sensitivity ..

Got any feature requests or suggestions?
tj.wheeler
Posts: 1
Joined: Wed Sep 07, 2016 9:23 am

Motion Detection sensitivity ..

Postby tj.wheeler » Wed Dec 07, 2016 2:34 am

Needs to be adjustable in each selected area ...
Example: My car is 50ft from camera and I need to detect motion of someone's head near my car.
but my porch is in the foreground and need much less sensitivity to prevent false triggers from shadows.

harrym1byt
Posts: 7
Joined: Fri Feb 10, 2017 3:55 pm

Re: Motion Detection sensitivity ..

Postby harrym1byt » Fri Feb 10, 2017 6:09 pm

Could I add to this, it would be useful to be able to select areas of a camera's view to be completely ignored by the motion detection system. It would be better, but I suppose much more difficult to program - if ignored area could be different for each stored PZT view.

I have not found a setting for it yet, but it would be useful if the motion detected could optionally trigger a noise on the PC as record.

harrym1byt
Posts: 7
Joined: Fri Feb 10, 2017 3:55 pm

Re: Motion Detection sensitivity ..

Postby harrym1byt » Sat Feb 11, 2017 9:13 am

I have just spotted that Ispy can in fact be set up to ignore some parts of the cameras view. :oops:

I am not yet clear on whether the marked areas are the ignored detection areas, or the areas which cause it to be triggered.


Return to “Suggestions”

Who is online

Users browsing this forum: No registered users and 2 guests