Trying to connect a p2p cam

Community help for connecting new cameras to iSpy
Amadeo
Posts: 1
Joined: Fri Feb 17, 2017 1:09 am

Trying to connect a p2p cam

Postby Amadeo » Fri Feb 17, 2017 1:14 am

Hi folks,

so here is my problem, I have bought a wifi/ipcam, comercial name BLYSS E308733, my problem is it doesnt appear anywhere, also it just works with that awful software it brigns in the box called Myp2pCam, I'm getting crazy trying to make it work on iSpy. Until now I have no idea how to do it, I even got into the cam using Telnet protocol and all that just to try to get a valid URL to make it work, but it's been imposible.

It would be great if someone could help me out !

I am frustrated

THx Amadeo

Painer
Posts: 1
Joined: Sun Feb 19, 2017 8:27 pm

Re: Trying to connect a p2p cam

Postby Painer » Sun Feb 19, 2017 8:39 pm

Not sure if this helps but I have been struggling to install 2 Chinese cheap P2P (IP) H.264 cameras using Ispy.

Today they both works..

I was selecting the wrong type of camera.

When I clicked on Add in Ispy I was selecting IP Camera with Wizard but it didn't find my Cameras. I played with a few of the bold ones listed but that didn't work.

I then tried selecting IP Cameras and manually filling in the details of my cameras IP addresses etc but that to didn't work.

I then selected ONVIF Camera and hello there were both of my cameras listed under their Chinese based Servers:- NVT (country/china) .

I clicked on each of the links in the left side box and up popped my cameras showing up as rtsp:// its' IP Address/user=adminpassword=blah blah, etc.

Try that and see how you go...

Good Luck

Steve


Return to “Connecting Cameras”

Who is online

Users browsing this forum: No registered users and 1 guest